BLVWT - READY MIX JOINT COMPOUND (ALL PURPOSE OR TO

  • MSDS: BLVWT
  • Manufacturer: GOLD BOND BUILDING PRODUCTS
  • Product Name: READY MIX JOINT COMPOUND (ALL PURPOSE OR TO
  • National Stock Number: 8030-00N022730
Product Identification

Product ID:READY MIX JOINT COMPOUND (ALL PURPOSE OR TO
MSDS Date:11/01/1985
FSC:8030
NIIN:00N022730
MSDS Number: BLVWT

Responsible Party
GOLD BOND BUILDING PRODUCTS
2001 REXFORD RD
CHARLOTTE, NC 28211-3415
US

Emergency Phone: 704-365-7300

Info Phone: 704-365-7300

Preparer: N W KALETA

Cage: 9N701

Contractor
GOLD BOND BUILDING PRODUCTS DIV NATIONAL GYPSUM
CHARLOTTE, NC 28211-3415 US

Telephone: 704-365-7300

Cage: 9N701

Ingredients

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICATE, MICA; (MICA)

CAS: 12001-26-2

RTECS: VV8760000

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST


SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION, CONTINUOUS EXPOSURE TO
HIGH DUST CONCENTRATIONS MAY IMPAIR LUNG FUNCTION.
Explanation of Carcinogenicity:CRYSTALLINE SILICA QUARTZ. IARC GROUP
2A.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: WASH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH WITH
WATER FOR 15 MIN. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG. (GIVE
O*2/ARTF RESP) . INGEST: CALL MD IMMED .

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:NOT APPLICABLE. WEAR NIOSH/MSHA APPROVED SCBA
AND FULL PROTECTIVE EQUIPMENT .

Accidental Release

Spill Release Procedures:SCOOP OR SHOVEL UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID FREEZING.
Other Precautions:DO NOT DRY SAND. WET SAND OR SPONGE JOINTS, BEADS AND
NAILS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR DUST IF
NEEDED.
Protective Gloves:NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Appearance and Odor:WHITE TO GREY PASTE WITH MILD ACETATE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:RELEASES CO*2 WHEN HEATED TO
DECOMPOSITION.

Disposal

Waste Disposal Methods:LANDFILL IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.